Production process of Gift Box

10-08-2019

Production process of Gift Box 


We usually refer to gift boxes as hard packing boxes with exquisite workmanship and strong compressive strength. To understand the process of making gift boxes, one must first understand the constituent elements: face paper+ash board (wood board)+bottom paper+inner support. 


Gift Box


Before making the gift box, the design scheme must be determined, then the physical proof shall be made according to the design scheme, and the production process can be started only after the sample box is determined: Material preparation: purchase materials according to sample box and order quantity, such as: face paper (specification, gram, quantity, brand), grey board or wood board (specification, gram, quantity, brand), other accessories (such as ribbon, sponge, magnet, silk cloth, etc.), inner support (sponge, EVA/ blister, pit paper, pearl cotton, etc.). 



Plate making: at the same time of preparing materials, the plate making master should start plate making (plate making for printing plate making, post-printing process, such as bronzing, embossing, UV, etc., and plate making for various beer cutting dies).



Printing: The panel to be printed should be printed. The quality of the printing process mainly depends on the degree of change in color, pattern and layout cleanliness and other related aspects. The most taboo color difference, stain, color dim phenomenon. Post-press process: after the face paper is printed, it is usually covered with film (waterproof, scratch-proof, color fading-proof). after the covering, it can also be treated with bronzing (silver), embossing, UV, embossing and other processes.



Beer cutting: at the same time of printing, or after the gray board or other accessory materials are put into storage, the materials that need beer cutting can be beer cut (the test mold must be used before beer cutting), such as gray board, EVA inner support, etc. Some gray board beer needs V-slot after cutting. Paste mounting: after the surface paper is processed, it is pasted and mounted with ash board (or wood board). if it can be mounted on the machine, the template must be debugged on the machine first. for manual pasting, the process requirements must be explained clearly, the standards must be formulated, and the quality inspection personnel for each process must be arranged.


gift box packaging

Assembly: The pasted and mounted gift box is finally assembled. The inner support is placed with the inner support (implemented according to the sample box standard). The inner support is put in place. After internal and external cleaning, the box is packed, labeled ex-factory and put into storage.

Dapatkan harga terkini? Kami akan bertindak balas secepat mungkin (dalam masa 12 jam)

Dasar privasi